ECO Farm Z8–800 Samsung LM301B LED Grow Light With Separately UV+IR Control VS GROPLANNER LED GROW LIGHT 800W- GROPLANNER I SERIES

Grow lights are a simple and effective way to provide sufficient light and sustain plants when they can’t get enough sunlight. And since most of us live in homes with roofs, our plants will naturally receive less light than if they were growing in an outdoor garden. And some of us live in areas with naturally less light — whether that’s caused by overcast conditions or nearby buildings blocking the sun. So then we need plant lights to help our plants thrive.

How Do LED Grow Lights Work?

These special LED grow lights really work with leafy plants, fruit-bearing plants, and flowering plants based on experiments and studies. From hobbyists to professional indoor growers that run cultivation centers, these LED grow lights have already proved their worth. But just like any other piece of technology, you have to make sure that you know how to use it. Contrary to what other people think, indoor plants can still be harmed by too much artificial light.

Unlike us, plants have little tolerance when it comes to either insufficient or extra attention. Flash news, plants also need enough light at the right place with the right distance. But since indoor plants have limited options when it comes to location, it’s up to the LED grow light. These LED grow lights are constructed with small electronic components that are made from two different semiconductor materials. These materials work by creating their own light spectrum.

The first conductor — contains negative charges that are called electrons
The second conductor — contains positive charges that are called holes
Once the voltage is applied, the electric current flows through it to make its holes and electrons collide. This process called recombination allows the bulb to release energy called photons or light quanta. The first versions of LEDs have a low light output and limited color options. But now, modern LEDs offer more color options and a higher level of brightness. Its types of lights also come in different types from visible, ultraviolet spectral, to infrared lights.

Unlike other bulbs, LED grow lights don’t use gas, mercury, and filaments to produce light. In addition, these lights that are more energy and cost-efficient tends to last longer than incandescent lights. Most importantly, LED grow lights are more eco-friendly, compared with any other kind of lighting fixtures.

How Long Should I Leave My Grow Light On?

The amount of time you should leave grow light on depends on the growth stage of your marijuana plants. From the seedling to the vegetative stage, you need 18 hours of light with 8 hours of darkness. During the vegetative stage, you need 18 hours of light with 6 hours of darkness. However, during the flowering stage, you need 12 hours of light with 12 hours of dark. Without 12 uninterrupted hours of darkness, your plants won’t begin flowering because it won’t yet feel like fall to them.

In an outdoor setting, cannabis plants flower in the fall, when days become shorter, and the sun is lower in the sky, signaling to plants that the annual life cycle is coming to an end. After about 8 weeks of vegetative growth, you have to mimic this environmental change in the day cycle by reducing the light time on your plants from 18 hours to 12 hours.

Along with this change in light time, you’ll need to change the number of red wavelengths the plants receive as well. This can be accomplished in several ways, but a white, LED veg light alone won’t work. You will also need a red LED to grow lights as well.

Fixed light spectrum LED grow lights have been designed for both the vegetative and flowering stages. These lights will guarantee maximum intensity during the entire growing season; however, your marijuana plants will produce a better yield if you add more red wavelengths when it’s time to flower. Adding red light will alert your plants to the fall season when the sun is lower in the sky with more red hues. This will initiate the revered flower stage.

Many claim LED lights for marijuana work well during the vegetative stage but not for flowering. While this is a misconception, it will become a reality if you don’t know how to use the technology correctly.

After understanding the working principle of LED plant growth lights and how long they should work for your plants every day, here are two very good LED plant growth lights and their comparisons in various aspects.

ECO Farm Z8–800 Samsung LM301B LED Grow Light With Separately UV+IR Control

Features:

The ECO Farm grow light is equipped with SAMSUNG LM301B chip and 8 high-efficiency aluminum rods to ensure high-efficiency PPE 2.7umol/J, better heat dissipation, and long service life. Compared with old plant lights, the average PPFD is increased by 30%, and the yield and quality are increased by 50%. 8 LED growth lights, each rod is covered with high-grade glue, waterproof and easy to clean, not easy to be filled with dust. This plant growth light also uses a special dimmer, which can precisely adjust the brightness. 0–10 levels are optional. This means that you can see clear brightness levels and record while adjusting. No need to worry about differences. At the same time, it also has an ideal full-spectrum and amazing heat dissipation: excellent full-spectrum mixing of white, blue, red, and ultraviolet light, IR LED (3500K, 660nm and IR 760nm & 396nm UV), close to natural sunlight. The spectrum applies to the entire stage of indoor planting. This ECO Farm LED grow light has 3 channels control: Adjustable knob, IR switch, and UV switch. UV and IR can be controlled separately. In this case, if an experienced grower uses it at the beginning of flowering, IR will induce the plant to bloom and increase the number of flowers. Using it during the last two weeks of the flowering period, ultraviolet light will increase the THC content in the plant. Finally, it is a fanless and zero-noise design, which is very quiet.

Model Z8–800 PRO 
Spectrum： Samsung LM301b 3500k + 660nm Far Red + IR + UV
PPF(µmol/s) ：2002.1 
Efficacy(µmol/J) ：2.7 
Input Power： 800 
Input Voltage ：100–277V 
Power Factor： ＞0.95 
Dimming： 0–10V 
Light Distribution： 120° 
Working temperature： -20℃-55℃ 
Lifespan： ＞50000hrs 
Dimensions /(mm) ：1000*1000*113 
Packing size /(mm) ：1150*210*270

GROPLANNER LED GROW LIGHT 800W- GROPLANNER I SERIES

Features:

This GROPLANNER LED grow light has a balanced lighting design, which is enough to cope with complex indoor use environments. The actual power is 800W, and it provides PPF output (2200μmol/s), allowing you to obtain a higher output of 30% to help you achieve maximum quality and Quantity, better than the traditional growth system. It is very suitable for 6'x6' plant coverage and 7'x7' reduced coverage, which greatly improves the light coverage. The advanced design effectively expands the light area. At the same time, the lighting is more uniform. With a high energy efficiency of 2.75 umoll/J, it also provides a high-quality and complete natural spectrum from 400nm to 700nm. There is no need to worry about heat dissipation even with high power. The aluminum cooling plate using advanced small molecule materials, plus the heat sink of each chip, achieves an excellent heat dissipation effect. All these designs make the heat dissipation efficiency high. No fan, no noise.

Power consumption：800W
Light Color：Full Spectrum
PPF: 2200μmol/s
Efficacy：2.75 μmol/J
Dimming：0–10V
Heat：120°F
Lifetime : >60,000 hrs
Input Voltage：120–277VAC, 50/60Hz
Thermal Management：Passive-Cooled Design
Coverage：5'*5' for Flw, 6'*6' for Veg

How to Install Vegetative Grow Lights

Installation of LED grows light is easy when you follow the necessary steps.

To start with, make sure you go through the installation guide provided by the manufacturer to avoid a stressful installation process.

Below are some of the basic steps you can follow to install your grow lights.

Make sure you have the necessary installation tools instant

1. Unbox the product
2. A couple each component together
3. Locate the aluminum bar and connect the LED strips to it as expected.
4. Install the grow light to the appropriate position

Do’s and Don’ts of LED Grow Lights

1. Do not install or operate LED grow light with the traditional options
2. Ensure the cooling system is working effectively
3. Keep an eye on the temperature sensor
4. Make sure the lights are a bit closer to the plant
5. Focus on lesser production of heat to save more on water requirement

Maintaining LED Grow Light

Yes, the LED lights of ever grow light are expected to last for about 50,000 of use. This doesn’t mean it will end up staying active and effective within the stated time. In some cases, one or more components of the grow light may fail. To get the best out of you grow light and ensure they stay active for a long time, there are some maintenance culture users must develop.

The following are some of the things you can do to get the best out of your grow light:

1. Clean your grow light from time to time. This ensures it stays clear of dust and debris.
2. Occasionally, conduct necessary inspections on the grow light. Check if various components are working optimally.
3. Do not fail to do the necessary research before purchase. You can as well find out about the warranty.
4. Study the user guide to learn more about the product and how best you can maintain it.

Conclusion

Every day, the world keeps evolving. A lot of changes happen in the world of farming. To get the best result and as well stay relevant in the world of farming, a farmer must ensure he or she adopts the new trend. Make sure you always pay attention to the latest breakthrough and adopt when and where necessary.

As of today, LED grow lights are a major discovery that has been an amazing breakthrough in the world of indoor planting. If you ask several indoor planters today, they will tell you how pleased and fulfilled they are to have discovered this great trend.