TotalGrow MH Lumyre 480W LED Grow Light VS Kind LED X420 Grow Light

 LED grow lights are a relatively new type of light that has been designed for indoor plants to help them thrive. There are many benefits to using LED grow lights, but one major drawback is the cost of these lights. But what if I told you there was an affordable option? The best thing about LEDs is they last for years and produce less heat than traditional bulbs. They also use less electricity which makes them more economical in the long run. If you want your business’s greenhouses to be more productive, this article will tell you everything you need to know about LED grow lights!

Optimum Light Placement

LED lights can be placed much closer to plants than HID light because they give off less heat. This is a great advantage as it means the lights can be placed closer to the plants and therefore the light can penetrate the canopy of the plants more easily. In addition, it means you don’t need such a tall growing space.

Positioning the LED light the correct distance from your plant wills result in strong healthy crops with no burning or yellowing leaves. When your light is placed too close to the plants you may see bleached or yellow spots on the leaves.

If the LED is too close it can also result in nutrient deficiencies for your plants.

However, it is not always easy to calculate how far away your LED light should be — it’s something that differs depending on the size and power of your lights. It’s best to check the directions that come with your grow light and follow their recommended distances.

However, the following are general distances, to give a broad idea:

For germination: Hang roughly 92–100 cm above plants (for approximately 10 hours/day)
For seedlings: Hang roughly 81–92 cm above plants (for approximately 12 hours/day)
For plants in vegetative stage: Hang roughly 60–80 cm above plants (for approximately 18 hours/day)
For plants in flowering/fruit stage: Hang roughly 45–60 cm above plants (for approximately 12 hours/day)

What’s the benefit of using different coloured lights during a plant’s growth cycle?

Red light can help during a plant’s germination stage and during flowering. When used during germination, it can help roots to grow and seeds to germinate. Some studies suggest that blue light may even impede germination.

Blue light is responsible for assisting plant growth — helping the plants grow strong stems and leaves. These lights are frequently used during the vegetative growth stage for this reason.

As mentioned, red light is also used to encourage plants to flower and produce fruit. It is useful to use red light later in the plant’s lifecycle, as well as during germination. At this stage, often a combination of red and blue lights will be used.

TotalGrow MH Lumyre 480W LED Grow Light

Features:

TotalGrow LED grow lights feature multiple high-intensity light strips in a slim profile and built-in power supply to distribute the ideal light intensity evenly across your growing area to meet your growing goals. Superior, customizable full spectrum supports efficient, high-quality growth of any life stage and crop variety. This plug-and-play solution with direct daisy chaining is easy to implement, has low up-front and ongoing costs, and sustainably produces high-quality crops. The efficacy of this LED grow light is as high as 2.8 μmol/J to meet the light intensity your plants need. Robust, reliable, ideally shaped design for ease of use and excellent uniformity.

Kind LED X420 Grow Light

Features:

The Kind LED Grow Light is the perfect choice. This LED grow light uses this spectrum as an independently controlled channel. It provides users with full control over UV and IR. Therefore, growers can decide when to use these rays. It helps them avoid unnecessary stretches, eliminates wasted energy, and increases metabolites (boosting terpenes and potency). The full spectrum diodes used are highly efficient, helping growers improve plant quality and ensure larger harvests. In addition, the lifespan of these diodes is extended by a factor of 2. External driver mounts for grow lights allow you to reduce light height by 60% and heat output by 20%.

How to choose the best LED grow light for your needs?

Many people think growing with LEDs is difficult since it requires a lot of attention when compared to other types of light sources like T5 Fluorescent lights, HPS lamps, or MH(Metal Halide) lamps which are designed specifically for plant growth under artificial light. This isn’t true at all! They require less care because they produce very little heat and can be placed much closer to the tops of your plants than any other type of grow light. For example, a 250-watt HPS lamp will cover up to 2 sq ft / m² while a single board LED system of the same wattage will cover up to 4 sq ft / m² because it has a much higher lumen rating per watt.

LED grow lights also have another advantage — they can be easily attached to your desk or hanging from the walls without any additional equipment like HPS lamps require you to buy additional equipment like reflectors and ballasts that take up more space and cost much more money than LED grow lighting does. This is why LED grow lights are considered by many people to be the best source of artificial light for plant growth indoors under artificial lighting conditions. If you are growing small plants, there isn’t any need for you to buy expensive Ballast + Reflector combos when T5 Fluorescent Grow Lights would do just fine since you don’t have to place the light source very close to the tops of your plants.

In order to decide what LED grow lights are best for you, it is very important that you know a little bit about how they work before purchasing your own system. For example — a single banded 400 watt LED Grow Light System will typically produce 200–400 watts worth of PAR while a full spectrum 600 watts LED lamp would only produce 150–300 watts worth of PAR. If you plan on growing moderate size plants or even bigger ones, there isn’t any need for you to buy expensive full-spectrum lighting when you can get much better results from using single banded LEDs which produce more PAR per watt and give off better penetration into the plant canopy without losing much in the way of quality.

When growing plants indoors with LED grow lights, you should always try to section off your growing area by using reflective walls or other means or reflectors if necessary to ensure that all parts of your plant are receiving optimal lighting conditions without any shadowed areas. This is especially important for very tall plants because it can block out light from lower portions of the stem and leaves which will result in loss of growth hormones that can even lead to discoloration (yellowing) of outer leaves.

A few tips on buying good quality LED grow light:

When buying LED grow lights, you should first decide how much power you are going to need. The more plants you are trying to grow, the higher your wattage needs will be. Most LED grow light manufacturers recommend that their products should cover an area of 16 sq ft or greater for optimum growth but there are only very few models that can deliver on this claim at this point in time. If your space is significantly smaller than 16 sq ft, purchasing multiple units may offer better value for money since it can help reduce energy costs by using less electricity per square foot of growing space which means lower power bills.

If possible try to buy a system with user-replaceable modules so you don’t have to throw away the entire unit if one part starts to malfunction.

Many LED grow light manufacturers recommend the use of external COB LED grow lights as supplemental lighting for vegging and blooming stages but others believe that there isn’t any need for them because they produce far too much heat. The best way to decide whether you should use a supplemental COB LED grow lamp or not is to look at how big your growing area is and buy a unit that has a proper cooling system that can work well with supplemental lighting.

If you have a very small growing area, it will be better for you to avoid using COB lamps altogether since many models have vents that are situated at their base which means that you won’t be able to place them close enough to your plants without burning them if your space is 4 sq ft or less.

Conclusion

It is easy to grow your plants using the right grow lights. Lights are an integral part of growing plants, and many growers make use of them to make sure their plants receive the best amount of light. Since lights are so important, getting the right ones for your indoor garden is important. Considering factors like the color spectrum, light intensity, and bulb type can help you choose the right to grow lights for your plants.